The interface has to be configured for a vlan first i.e.: r7(config)#int f0/0 r7(config-if)#no sh r7(config-if)#int f0/0.1 r7(config-subif)#ip addr 1.1.1.1 255.255.255.0
Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or ISL vLAN. r7(config-subif)#encap isl 1 r7(config-subif)#ip addr 1.1.1.1 255.255.255.0 r7(config-subif)# -----Original Message----- From: adam krause [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 03, 2002 1:56 PM To: [EMAIL PROTECTED] Subject: putting ip class in cosco 2620 [7:40347] i want to create a new VLAN and after i type: ip address (x.x.x.x) (x.x.x.x) i get this: Configuring IP routing on a LAN subinterface is only allowed if that subinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or IS L vLAN. any suggestions? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40368&t=40347 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
