I appreciate it, but I'm actually not that sophisticated and this is what I was looking for:
2924xl#clock set 12:56:00 30 March 2002 Thanks Jorge !!! Phil -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of jorge rodriguez Sent: Sunday, April 07, 2002 3:38 AM To: [EMAIL PROTECTED] Subject: Re: Setting the date on a 2900XL [7:39947] Try this quick settings on global config: ("est" depending on your timezone location) clock timezone est -5 clock summer-time est recurring (Then point to an NTP public time server close to your timezone ) ( Here are some public NTP servers http://www.eecis.udel.edu/~mills/ntp/clock1.htm ) ntp server ip-address This way your switch will sync and pick the right time. Hope this helps Jorge / CCNA CCNP / CCIE wanabe ) [EMAIL PROTECTED] [EMAIL PROTECTED] http://learncisco.n3.net Phil Lorenz wrote: > Any ideas on this one. > > > > I have a 2900XL and it's stuck in 1993. I see nothing beyond the set > clock hh:mm:ss command. > > > > Thanks > > Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40736&t=39947 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
