use a mib walker and walk through your entire snmp tree. Pull ouot the oid's you need and script accordingly.
I use mg-soft's mib browser... http://www.mg-soft.si/ >>> "John Jackson" 04/10/02 11:17AM >>> We have 40 or so 75xx routers and we are looking for a SNMP MIB that we could uses to check the uptime on them. Any ideas? Thanks in advance. John >>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<< This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41064&t=41046 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
