I am confused about the debug output of a simple ISDN configuration. I have two routers R1 and R2 connecting with ISDN. R1 is using only PAP authentication, and R2 is using CHAP PAP. Now the debug is what is throwing me :
03:23:12: BR0 DDR: Dialing cause ip (s=180.1.113.1, d=180.1.113.3) 03:23:12: BR0 DDR: Attempting to dial 8358662 03:23:12: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 03:23:13: BR0:1 PPP: Treating connection as a callout 03:23:13: BR0:1 CHAP: I CHALLENGE id 66 len 23 from "r2 03:23:13: BR0:1 CHAP: O RESPONSE id 66 len 23 from "r1" 03:23:13: BR0:1 CHAP: I SUCCESS id 66 len 4 03:23:13: BR0:1 PAP: I AUTH-REQ id 17 len 13 from "r2 03:23:13: BR0:1 PAP: Authenticating peer r3 03:23:13: BR0:1 PAP: O AUTH-ACK id 17 len 5 03:23:13: BR0:1 DDR: dialer protocol up.!!!! It shows that CHAP is successful? Then is shows PAP as successful also? Shouldn't it just skip over CHAP and go straight to PAP? I have also tried to change the CHAP hostname on R2 to something different, then CHAP authentication fails and the PAP never kicks in? Can someone explain this to me or point me to a good document on the subject? Thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41108&t=41108 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
