Timothy ,
If the goal is just to change the Bridge ID ,then
just change the Priority . I don't know any way to change the MAC address
of the switch . Now, if teh ultimate goal is to stop the switch from
becoming the root of the Spanning Tree . Then you can use the STP Root
Gaurd Enhncement feature .
Check this out
http://www.cisco.com/warp/public/473/74.html
Thanks and hope this helps
Jaspreet
At 02:30 AM 4/11/2002 -0400, Timothy Ouellette wrote:
>Scouring cisco for an answer that someone mentioned.
>
>I'm trying to change the Bridge-ID (BID) for a particular vlan on a
>cat5k. I know it's possible if I just change the priorty for that
>particular vlan. Is it possible to change the mac address on a vlan so
>that the BID will change without change the prioty. Here's the question
>that was posed "how does one change the bridge ID for VLAN 200 on a
>Catalyst 5000 (os is 5.5(10)b"
>
>Can anyone help?
>
>Tim
>_________________________________________________________________
>Commercial lab list: http://www.groupstudy.com/list/commercial.html
>Please discuss commercial lab solutions on this list.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41194&t=41194
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
