CLNS is not need for IS-IS routing for IP At 03:03 PM 4/11/2002 -0400, you wrote: >Did you enable CLNS routing? You need to turn this on before you can >configure ISIS. > >Anthony Pace > > >""nntp.groupstudy.com"" wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, Group, > > > > I am trying to configure IS-IS at CCIE lab, and two of my router did not > > allow > > me to get into the IS-IS router mode. I wonder if anyone can tell me what > > the > > problem is. See following router output: > > > > Thanks > > > > Ruihai > > > > IOS (tm) C2600 Software (C2600-DS-M), Version 12.1(13), RELEASE SOFTWARE > > (fc3) > > System image file is "flash:c2600-ds-mz.121-13.bin" > > > > cisco 2610 (MPC860) processor (revision 0x202) with 39936K/9216K bytes of > > memory > > FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41224&t=41138 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
