Something like this on a router: int fa0/1 channel-group 24 int fa0/2 channel-group 24 int port-channel 24 ip add 10.1.1.1
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inte r_c/icdlanin.htm#xtocid1703911 On the 4000 and 6000 series it can be done like this: set port channel 1/1-2 35 set port channel 2/1-2,3/1-2,4/1-2,5/1-2 164 David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Jeffrey Reed > Sent: Friday, April 12, 2002 9:54 AM > To: [EMAIL PROTECTED] > Subject: Set Channel_id? [7:41303] > > > Is there a way to set the channel_id number for port channels? I see a lot > of commands reference the channel_id, but I dont see a way to > configure the > ID number. > > Thanks! > > Jeffrey Reed > Classic Networking, Inc. > Cell 717-805-5536 > Office 717-737-8586 > FAX 717-737-0290 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41341&t=41303 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
