This is true also. If you attempt to telnet into the router, you will receive a message that an enable password is required but none set.
I would (and do) use the access list if I have an enable password already set. -----Original Message----- From: Persio Pucci [mailto:[EMAIL PROTECTED]] Sent: Friday, April 12, 2002 10:13 AM To: John Allhiser Subject: Re: Disable Telnet [7:41293] If I am not mistaken, the router shall not accept telnet connections if it does not have a telnet password on the vty lines... Persio ----- Original Message ----- From: "John Allhiser" To: Sent: Friday, April 12, 2002 11:20 AM Subject: RE: Disable Telnet [7:41293] > access-list 30 deny 0.0.0.0 > line vty 0 4 > access-class 30 in > > -----Original Message----- > From: Wright, Jeremy [mailto:[EMAIL PROTECTED]] > Sent: Friday, April 12, 2002 9:05 AM > To: [EMAIL PROTECTED] > Subject: RE: Disable Telnet [7:41293] > > > youre correct. i was answering too quick without thinking about it more. ive > done it so many times but i havent had any caffeine this morning so i only > process about half of my thoughts > > -----Original Message----- > From: Dimitris Vassilopoulos [mailto:[EMAIL PROTECTED]] > Sent: Friday, April 12, 2002 8:44 AM > To: [EMAIL PROTECTED] > Subject: RE: Disable Telnet [7:41293] > > > Jeremy, > > If you enter "no login" under vty 0 4, then you'll get into > the router! > > "login" means that the router prompts " Password:". > "no login" instructs the router to bypass that, giving > you access immediately. > > Dvass Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41325&t=41293 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]