well I don't understand your question...but it would seem tat console output
would be console output regardless... IF you are consoling in at 9600, then
the output device is your screen. If you hook a printer up to the console
at 96008n1, then the output would be through the ribbon, onto the paper...
-Patrick
>>> "[EMAIL PROTECTED]" 04/15/02 05:03AM >>>
Hi Guys
I have a strange problem.
I have to carry a printer a different location ( The PC connected to
printer is not moving , only printer)
The printer must be connected to RS 232 Port of the PC.
So I will have to carry RS232 signals through Cisco Router.
I mean PC connected to serial port of router and Printer will connect to
the other router s serial port.
Anybody tried this or has an idea ?
Thanks.
>>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<<
This email and any files transmitted with it may contain confidential and
/or proprietary information in the possession of WellStar Health System,
Inc. ("WellStar") and is intended only for the individual or entity to whom
addressed. This email may contain information that is held to be
privileged, confidential and exempt from disclosure under applicable law. If
the reader of this message is not the intended recipient, you are hereby
notified that any unauthorized access, dissemination, distribution or
copying of any information from this email is strictly prohibited, and may
subject you to criminal and/or civil liability. If you have received this
email in error, please notify the sender by reply email and then delete this
email and its attachments from your computer. Thank you.
================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41486&t=41473
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
