Cisco routers reserve 25% (this value can be changed, but is not recommended)for routing, layer 2, etc. traffic. You can use the rest (75%) when configuring QoS.
>From: "Mark Rumfield" >Reply-To: "Mark Rumfield" >To: [EMAIL PROTECTED] >Subject: Available Bandwidth on 2610 [7:41586] >Date: Tue, 16 Apr 2002 08:16:35 -0400 > > > I have a 2610 with 3 serial interfaces. All 3 are point-to-point T1's. > > When you do a sho int, it shows bandwidth as 1544 Kbit, but it shows > > available bandwidth as 1158Kbit, no matter what the current load on the > > interface is. Routing protocal is OSPF. > > > > What does this really mean? And/or how is this available bandwidth > > determined? > > > > > > > > Serial1/0 is up, line protocol is up > > Hardware is DSCC4 with integrated T1 CSU/DSU > > Description: PTP to MB-West > > Internet address is 10.32.1.37/30 > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, > > reliability 255/255, txload 1/255, rxload 1/255 > > Encapsulation HDLC, loopback not set > > Keepalive set (10 sec) > > Last input 00:00:02, output 00:00:02, output hang never > > Last clearing of "show interface" counters 8w5d > > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > > Queueing strategy: weighted fair > > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > > Conversations 0/10/256 (active/max active/max total) > > Reserved Conversations 0/0 (allocated/max allocated) > > Available Bandwidth 1158 kilobits/sec > > 5 minute input rate 0 bits/sec, 0 packets/sec > > 5 minute output rate 0 bits/sec, 0 packets/sec > > 53324797 packets input, 1426721882 bytes, 0 no buffer > > Received 622749 broadcasts, 0 runts, 4 giants, 0 throttles > > 16 input errors, 1 CRC, 9 frame, 0 overrun, 0 ignored, 0 abort > > 53203873 packets output, 3470780381 bytes, 0 underruns > > 0 output errors, 0 collisions, 1 interface resets > > 0 output buffer failures, 0 output buffers swapped out > > 2 carrier transitions > > DCD=up DSR=up DTR=up RTS=up CTS=up > > > > > > Thanks in advance! > > > > > > Mark Rumfield > > Network Engineer > > Enterprise Products > > [EMAIL PROTECTED] _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41589&t=41586 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
