I just got a supIII installed in the lab a couple days ago and I don't
see any multi vlan options aside from a trunk:
C4006SUPIII(config-if)#switchport ?
access Set access mode characteristics of the interface
host Set port host
mode Set trunking mode of the interface
nonegotiate Device will not engage in negotiation protocol on this
interface
private-vlan Set the private VLAN host association or promiscuous
mapping
trunk Set trunking characteristics of the interface
C4006SUPIII(config-if)#switchport acc
C4006SUPIII(config-if)#switchport access ?
vlan Set VLAN when interface is in access mode
As far as appletalk is concerned yes you need a appletalke capable
router or bridge it.
Dave
As
Cisco Breaker wrote:
>
> Hi All,
>
> Our customer wants to buy cat 4006 with sup3. But they use Appletalk. As I
> know the sup3 IOS doesnt support Appletalk routing yet, so I have to put a
> router for that, am I right?
>
> And also is it possible to assign the server's port into 2 vlans. If I
can
> put the server's port which is on the switch to 2 Vlans (multi Vlan) it
will
> be OK but is it possible?
>
> Any help will be appreciated.
>
> Best regards,
>
> Cisco Breaker
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41596&t=41571
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
