Can you show us the rest of the config of R5-2602? Are you using any
filtering? (i.e. distribute-lists/route-maps). I've seen routes (LSAs) in
the OSPF database and not in the routing table due to filtering. What about
clearing the route table? 

Curious - Is this the entire routing table? Because you don't have any OSPF
routes in this table at all.

-chris

> Hi, Group,
> 
> I am having trouble with this OSPF configuration.
> Router R5-2602 in Area 0 learned a route from Area 1 from 
> Router 6.6.6.6 ,
> as shown as Summary Net link.  Router 6.6.6.6 is the ABR.  
> But this route
> does not appear in routing table, only in OSPF database.  
> Anyone know why
> and how to fix it.
> 
> Thanks
> 
> Ruihai
> 
> R5-2602#sh ip ospf da
> 
>        OSPF Router with ID (5.5.5.5) (Process ID 10)
> 
> 
>                 Router Link States (Area 0)
> 
> Link ID         ADV Router      Age         Seq#       
> Checksum Link count
> 5.5.5.5         5.5.5.5         92          0x80000002 0xB4D4   3
> 6.6.6.6         6.6.6.6         92          0x80000003 0xBEFB   1
> 
>                 Net Link States (Area 0)
> 
> Link ID         ADV Router      Age         Seq#       Checksum
> 150.100.2.6     6.6.6.6         93          0x80000001 0x1F2
> 
>                 Summary Net Link States (Area 0)
> 
> Link ID         ADV Router      Age         Seq#       Checksum
> 150.100.50.40   6.6.6.6         213         0x80000001 0xFAD1
> 
> 
> R5-2602#
> R5-2602#sh ip ospf ne
> 
> Neighbor ID     Pri   State           Dead Time   Address     
>     Interface
> 6.6.6.6           1   FULL/  -        00:01:47    150.100.2.6 
>     Serial0/0
> 
> 
> R5-2602#sh ip route
>      1.0.0.0/24 is subnetted, 1 subnets
> C       1.2.3.0 is directly connected, FastEthernet0/1
> S    209.123.45.0/24 [1/0] via 192.168.1.1
>      65.0.0.0/24 is subnetted, 1 subnets
> S       65.215.18.0 [1/0] via 192.168.1.1
>      5.0.0.0/24 is subnetted, 1 subnets
> C       5.5.5.0 is directly connected, Loopback0
> C    192.168.1.0/24 is directly connected, FastEthernet0/1
>      150.100.0.0/16 is variably subnetted, 2 subnets, 2 masks
> C       150.100.2.0/23 is directly connected, Serial0/0
> C       150.100.10.0/24 is directly connected, FastEthernet0/0




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41622&t=41611
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to