Is it possible that someone put the no-exec line on the console port or your speed isn't set to 9600. Are you using hyperterm or teraterm or equivalent?
If this isn't a production box, why not practice your password recovery skills and set a new vty password and then check the console settings? Tim On 17 Apr 2002 23:04:32 -0400, [EMAIL PROTECTED] ("Juan Blanco") wrote: >Team, >I have a 2500 route which I don't seem to be able to connect to the console >port, and one serial interface has an ip, which I can ping to and I can >telnet to it but I don't seem to be able to have the correct password. What >else I can do here to get into this baby..... > >Thanks, > >JB Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41799&t=41796 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]