show ip route ospf show ip bgp show ip route ? -----Original Message----- From: bergenpeak [mailto:[EMAIL PROTECTED]] Sent: 18 April 2002 13:37 To: [EMAIL PROTECTED] Subject: Was Re: longest match vs. other metrics [7:41692]
Related question to the above thread. As discussed, each routing protocol will maintain its list of prefixes that it knows about. A route selection process runs that considers the routes from each routing process and puts the "best" into the routing table. (best being defined by the route selection process). "show ip route" will show those routes selected and in the routing table. Is there an equivalent command that will show me the same information (prefix/length, next hop/interface) for all the prefixs known by a routing protocol? Suppose I'm running OSPF and BGP on a box and I wanted to see what prefix/lengths are being carried in each routing protocol. What commands would I use to see this? Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41817&t=41692 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
