Rather than a OS issue maybe there is a config issue? Try a "show port channel 1" to see the Sup config You might want to "set port channel 1/1-2 off"
> -----Original Message----- > From: John McCartney [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 18, 2002 8:47 AM > To: [EMAIL PROTECTED] > Subject: CAT5K PAGP-3 error [7:41822] > > > Hi all, > > I have a CAT5K (16M-DRAM/8Mb-flash)that I tried to upgrade > the software to > 4.5(6a) and I keep gettin gthe error "PAGP-3-CONGPORTCHLFAIL" > everytime I > connect up to the supervisor II 10/100 ports. I looked up the > error msg and > it says to reset the module and it should clear up, but it > doesn't. How can > I remove the image from flash? Any help is appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41830&t=41822 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]