How can you tell a switch or router to treat untagged frames as any other VLAN other thatn VLAN1 which is the default? Is it a VTP command on the switch? How about routers ? How about 2924 siwtches?
Anthony Pace ""Jeffrey Reed"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > One of the things related to native VLAN was VTP updates. I think they go > over the "native" VLAN, so you'll need to make sure its the same for all the > switches in the same VTP domain. > > Jeffrey Reed > Classic Networking, Inc. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Lopez, Robert > Sent: Thursday, April 18, 2002 1:10 PM > To: [EMAIL PROTECTED] > Subject: native vlan [7:41837] > > Group, > > What is the significance of deciding what vlan to use for the "native vlan" > when setting up a trunk. Presently, I use "native vlan 1" when setting up > a trunk. Could I use any other vlan that is established on both switches as > the "native vlan"? I'll be searching thru CCO while I wait for a faster > response. :) TIA. > > Robert > > > > > Robert M. Lopez > Network Engineering > CIT - Ann Arbor > Pfizer Global Research & Development > Phone 734-622-3948 Fax 734-622-1690 > > "There are only two ways to live your life. One is as though nothing is a > miracle. The other is as though everything is a miracle." ...Albert > Einstein Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41853&t=41853 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
