Type quicker!!!!! Sounds daft, but you've got to fit it in the 30 seconds. Just cut and paste a script if you've got fidget fingers like me.
Gaz ""Magichut"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Thank you, > I can get to the enable mode, however when I run the set enablepass, it > requests the old password. hence this command is useless... > Any other ideas? > Thanks again, > > ""Patrick Bass"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > use the 'set password' command to change the login password of the cli. > > use the 'set enablepass' command to change the password for the privileged > > level of the cli. > > > > > > ""Magichut"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hello, > > > > > > I have the silliest question. It should be simple, but it's not > > turning > > > out that way. I have a Cisco ws-c2900 series switch with a sup. eng. on > > it. > > > It has a console port, 2 mdi ports and a reset button (no Mode button). > I > > > am merely trying to reset the password. the company that owns the > switch > > > lost their IT guy and need to reset the vlans. I can get to enable mode > > by > > > cycling the switch and initially logging in within seconds of boot up. > > but > > > cannot reset the password. I can change the vlans, reset gateways, and > > > everything but reset the password. any help would be appreciated here. > > > > > > Thanks, > > > Magichut Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41892&t=41680 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
