Once it goes down, does it stay down or does it bounce ? Thanks
Larry -----Original Message----- From: Naafi Matovu [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 23, 2002 1:33 PM To: [EMAIL PROTECTED] Subject: frame-relay [7:42350] Hi all I've been configuring a cisco 2600 dual wic with three subinterfaces on serial 0/1. If i leave the the keepalive to 10 sec, the line protocol on the serial 0/1 keeps coming up but going down after a couple of seconds. The only way i can keep the line protocol up is (no keepalive) on seial 0/1. Iam not sure whether this is the best way of sorting out this problem.Here is the current config on this serial port Serial0/1 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY IETF, loopback not set Keepalive not set Broadcast queue 0/64, broadcasts sent/dropped 96/227, interface broadcasts 96 Last input 00:00:17, output 00:00:12, output hang never Last clearing of "show interface" counters 01:26:53 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/2/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 11467 packets input, 876671 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 33 input errors, 0 CRC, 33 frame, 0 overrun, 0 ignored, 0 abort 11125 packets output, 799491 bytes, 0 underruns 0 output errors, 0 collisions, 45 interface resets 0 output buffer failures, 0 output buffers swapped out 2 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42354&t=42350 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]