I went through the TAC help desk and after a couple of hours, it turned out I just needed to add a : to the end of the copy tftp flash string. I had previously upgraded 12 2900 switches with out using the : and they worked fine. Tech said the difference was either IOS ver or hardware revision. Thanks for everyone's help.
-----Original Message----- From: Daniel Cotts [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 24, 2002 11:08 AM To: 'Ed Gobeille'; [EMAIL PROTECTED] Subject: RE: IOS upgrade on 2900 failing [7:42397] Do a "dir flash:" You should see something like: OP_Center>dir flash: Directory of flash: 2 -rwx 1223432 Jun 24 1999 01:26:57 c2900XL-h2s-mz-112.8.2-SA6.bin 3 -rwx 98833 Jun 24 1999 01:26:57 c2900XL-diag-mz-112.8.2-SA6 4 drwx 10816 Jun 24 1999 01:27:10 html 175 -rwx 277 Jan 01 1970 00:00:18 env_vars 176 -rwx 2446 Apr 21 1993 17:13:02 config.text 3612672 bytes total (1781248 bytes free) It's possible to have more than one image in Flash. If so, there won't be room to add the new one. Erase one of the old ones. Let us know the solution. > -----Original Message----- > From: Ed Gobeille [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, April 23, 2002 7:12 PM > To: [EMAIL PROTECTED] > Subject: IOS upgrade on 2900 failing [7:42397] > > > I'm getting an unusual error while tring to upgrade IOS on several of > my 2900XL series switches. After doing the copy tftp flash > command, I get the > response from the IOS "copy to or from flash not > implemented". TAC site > does not have anything on this that I could find. Any ideas? Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42488&t=42397 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]