There is a way to do this, but it is shady. I didn't think I would ever see a reason to use this, but your situation is described exactly in this document. If you are like most cable/dsl customers you have a bridge in your house, and your address probably doesn't change all that often. I believe a friend said his only changes once every 3 months. You would have to modify your config when your address changed, but this would work. Your probably better off buying a Linksys for 100 dollars. Unfortunately I don't believe you can assign a secondary address when you have specified that the interface uses dhcp, at least not on any of my routers.
http://www.cisco.com/warp/public/556/nat-on-stick.html ~-----Original Message----- ~From: hktco [mailto:[EMAIL PROTECTED]] ~Sent: Wednesday, April 24, 2002 8:46 PM ~To: [EMAIL PROTECTED] ~Subject: how to share 1 Ethernet interface. possible? [7:42487] ~ ~ ~I have only ***one*** ethernet interface on 2610 and it needs to be ~both a dhcp client and assigned a static IP. i.e. something like: ~ ~int e0/0 ~ ip address dhcp ~ ip add 192.168.1.254 255.255.255.0 ~ ~but in practice, it is NOT allowed. Also I tried to use subinterfaces, ~and again, it won't let me to achieve the above implementation. ~ ~ ~The reason I am doing this is that I am trying to share my broadband ~connection through the Cisco ~router. That's why it must be a DHCP client so that it can ~grab an IP from ~the ~ISP. ~ ~Then I'll need another ethernet interface to connect to my inside LAN! ~but pathetically, I have only 1 physical ethernet interface!!! ~ ~Could there be any workaround? Thanks ~ ~hktco ~ ~ ~ ~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42494&t=42487 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
