I cannot think of a scenario where you would use HSRP without the standby
and active interface not plugged into a switch/hub or 2 seperate switches
that are trunked. Here is an ASCII visual that may help:
6509 6509
\ /
\ /
-----HUB/SWITCH-------
|
|
HOST
OR
6509 6509
\ /
\ /
switch switch
| |
| |
------host-------
The configs you posted look fine Make sure you Physical design matches one
of the ASCII visuals. Hope this helps ;)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42610&t=42592
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
