Ricky, if you are overloading on an interface's ip address then your above statement would be correct. assuming that you have an access list permitting the range of the network. if you have a nat pool then a static statement would suffice. such as ip nat inside source static private ip - public ip of course you would make sure that your outside and inside interfaces have their respective nat statements.
your access list needs to deny the static statements so they do not use the nat pool , if one is configured. if you are overloading on an interface then you need to permit the range of the network. hope this helps. Tony Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42740&t=42676 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]