Not for sure about question #1. Question #2, the first statement would advertise the network 180.4.4.0/24 including all addresses from 180.4.4.0 - 180.4.4.255. The second command would only advertise the host 180.4.4.4.
HTH, Mike W. "William Lijewski" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all, > > I have 2 quick topics I could use some clarification on: > > 1) There is a new command for 12.2 called > > PPP MULTILINK LOAD-THRESHOLD > > What is the difference between this command and DIALER LOAD-THRESHOLD, and > when would I use one over the other? > > 2) In OSPF you can advertise the newtworks in 2 ways: > > network 180.4.4.0 0.0.0.255 area 0 > > or > > network 180.4.4.4 0.0.0.0 area 0 > > What is the advantage of advertising just the specific interface, is there > really a difference between the two? > > Thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42742&t=42739 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
