Yes - use a config like this: ! aaa authentication ppp default none aaa authorization network default none aaa authentication ppp dialup group tacacs+ local aaa authorization network dialup group tacacs+ local aaa accounting network dialup start-stop group tacacs+ local ! interface group-async1 ! ppp authentication ms-chap pap dialup ppp authorization dialup ppp accounting dialup ! interface serial0/0 ! no ppp authentication no ppp authorization no ppp accounting !
NetEng wrote: > > I have a 2600 series that has a 16 port async card for RAS dialup. It also > has two WIC's for two T-1s that run ppp multilink. I want to enable tacacs > for ppp dialup but not for the two T-1s. Is this possible? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42831&t=42818 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
