> yes, you must change the default frame size on the ethernet
> side of both
> bridges to 1522 (default 1518). As far as the radio is
> concern it will pass
> the frames out over the wireless. You will need a switch on
> the other end of
> the bridge to recieve the frames and break out the vlans.
That would be required for ISL, but 802.1q should go with no
changes?
Marko.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42843&t=42833
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
