Hi all, maybe some PIX guru can shed some light here.
While I was uploading the pix621.bin software to a lab PIX, after a reload, I found out that the new software does not like an underscore(_) in the hostname. I changed the hostname LAB_PIX to LAB-PIX. This then complained about the rsa key pair used for SSH access. No problem here. I removed the key pair and regenerated it, saved, all ok. I used "no ca save all" and "ca zeroize rsa". Key pair was successfully regenerated and saved. Problem now is that I can not SSH from here in any more. I get a message that says: "Decrypting packet: received/computed checksum error" from my secureCRT client. I can still get into the PIX via the internal router and then telnet to the internal cards IP address. So this is SSH only that is a problem. Any ideas here.... Thanks in advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43215&t=43215 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]