Don't you need FXS to plug phones into? Rah
-----Original Message----- From: Edmund Woltynski [mailto:[EMAIL PROTECTED]] Sent: 11 May 2002 18:19 To: [EMAIL PROTECTED] Subject: VoIP & Netmeeting [7:43949] Hi all Firstly I have checked the archives & found nothing to help me solve this problem which I thought I had setup a working scenario in my lab 2 years ago (getting rusty have'nt played with this stuff for a while). Scenario as per sketch below G===D G===D /o\ /o\ --- Phone No=11 --- Phone No=22 \ / FXO \ / FXO ------ 192.168.10.0 ------ ( A )---------------( B ) ------ ------ / 192.168.168.80 \192.168.20.1 / \ _____ _____ | | NetMeeting | | NetMeeting |___| 12 |___| 23 / / / / ---- ---- 192.168.168.81 192.168.20.2 IOS = c2600-js-mz.122-7b.bin The problem I have is that I cannot get netmeeting 12 (192.168.168.81) with gateway (in NM 12) set to router A to ring & converse with phone 22 (FXO) on router B but can with phone 11 (naturally) and vica versa ie netmeeting 23 (192.168.20.1) cannot ring and setup a call with phone 11 but can with phone 22. Both phones (11 & 22) are able to initiate calls and converse with either NMs 12 or 23 and phone to phone works. (BTW using the latest version of netmeeting and have installed other IOS (plus or better to eliminate possible buggy IOS)and NM12 to NM23 ok. Would anyone care to take a quick look and see what I have missed? - much appreciated. ----------------------- A#sho run Building configuration... Current configuration : 1605 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname A ! enable password 7 xxxxxx ! memory-size iomem 10 ip subnet-zero no ip domain-lookup ! call rsvp-sync interface Ethernet0/0 ip address 192.168.168.80 255.255.255.0 half-duplex ! interface Serial0/0 description connected to B bandwidth 1536 ip address 192.168.10.1 255.255.255.252 encapsulation ppp ip tcp header-compression iphc-format no fair-queue clockrate 4000000 ip rtp header-compression iphc-format ip rtp reserve 16384 100 24 ! router rip version 2 network 192.168.10.0 network 192.168.168.0 no auto-summary ! ip classless no ip http server ip pim bidir-enable snmp-server community public RO ! voice-port 1/0/0 cptone AU description connected to Phone (11) ! dial-peer cor custom ! dial-peer voice 1 pots destination-pattern 11 port 1/0/0 ! dial-peer voice 5 voip destination-pattern 22 session target ipv4:192.168.20.1 ip precedence 5 ! dial-peer voice 81 voip destination-pattern 12 session target ipv4:192.168.168.81 codec g711ulaw ! dial-peer voice 82 voip destination-pattern 23 session target ipv4:192.168.20.2 codec g711ulaw ! line con 0 exec-timeout 0 0 password 7 xxxxx login line aux 0 line vty 0 4 password 7 xxxxxx login ! end A# B#sho run Building configuration... Current configuration : 1642 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname B ! enable password 7 xxxxx ! memory-size iomem 10 ip subnet-zero no ip domain-lookup ! call rsvp-sync ! interface Ethernet0/0 ip address 192.168.20.1 255.255.255.0 half-duplex ! interface Serial0/1 description connected to A bandwidth 1536 ip address 192.168.10.2 255.255.255.252 encapsulation ppp ip tcp header-compression iphc-format fair-queue 64 256 1 ip rtp header-compression iphc-format ip rtp reserve 16384 100 24 ! router rip version 2 network 192.168.10.0 network 192.168.20.0 no auto-summary ! ip classless no ip http server ip pim bidir-enable ! ! snmp-server community public RO ! voice-port 1/0/0 cptone AU description connected to Phone_1 (22) ! dial-peer cor custom ! dial-peer voice 1 pots destination-pattern 22 port 1/0/0 ! dial-peer voice 5 voip destination-pattern 11 session target ipv4:192.168.168.80 ip precedence 5 ! dial-peer voice 81 voip destination-pattern 12 session target ipv4:192.168.168.81 codec g711ulaw ! dial-peer voice 82 voip destination-pattern 23 session target ipv4:192.168.20.2 codec g711ulaw ! ! line con 0 exec-timeout 0 0 password 7 xxxxx login line aux 0 line vty 0 4 password 7 xxxxxx login ! end B# -- ------------------------------------------------------ Regards Edmund Woltynski ___________________________ The information transmitted by the following e-mail is intended only for the addressee and may contain confidential and/or privileged material. Any interception, review, retransmission, dissemination, or other use of, or taking of any action upon this information by persons or entities other than the intended recipient is prohibited by law and may subject them to criminal or civil liability. If you received this communication in error, please contact us immediately at (618) 83711492, and delete the communication from any computer or network system. ------------------------------------------------- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43957&t=43949 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]