Hi.. We just bought a cisco 3550 switch and it has 2 gigabyte fiber ports 12, 13 and 10 gigabyte fastethernet ports 1-10. But why they are all shown to be the same for eg interface GigabitEthernet0/1-12 in the config. And What kind of cable should I connected to port 1-10? Cat5 or Cat6? If we connected via Cat5 it means the speed is 1000Mbit?? I also feel strange that why the config shown as no ip address in all the interface, I thought we can only configure IP for VLAN in switches not interface? What is means by no switchport??
hostname Switch ! enable secret 5 $1$ej9.$DMUvAUnZOAmvmgqBEzIxE0 ! interface GigabitEthernet0/1 no switchport no ip address ! interface GigabitEthernet0/2 no ip address ! interface GigabitEthernet0/3 no ip address ! interface GigabitEthernet0/4 no ip address ! interface GigabitEthernet0/5 no ip address ! interface GigabitEthernet0/6 no ip address ! interface GigabitEthernet0/7 no ip address ! interface GigabitEthernet0/8 no ip address ! interface GigabitEthernet0/9 no ip address ! interface GigabitEthernet0/10 no ip address ! interface GigabitEthernet0/11 no ip address ! interface GigabitEthernet0/12 no ip address ...! interface VLAN1 ip address 172.20.137.50 255.255.255.0 no ip directed-broadcast ip nat outside _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44009&t=44009 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
