Hi, I updated recently the boot image for a 7200 router from c7200-boot-mz.111-22.CC (very old one) to c7200-kboot-mz.122-1.bin
Now when the router reloads I get this error message: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it. %AAAA-4-SERVUNDEF: The server-group "tacacs+" is not defined. Please define it.% Can't create VRF vlan_1% Can't create VRF vlan_2% Can't create VRF vlan_3 % VRF vlan_1 not configured. % VRF vlan_2 not configured. 192.168.250.0 overlaps with FastEthernet0/0.1 % VRF vlan_3 not configured. %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader. What can I do to stop this happening? Thanks in advance Silvia Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44177&t=44177 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
