""Khurrum Shahzad"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello > Can anybody tell me any mistake or missing configuration for frame relay > traffc shaping? > I connected two cisco 2600 router serial interfaces throug 32 k link. I > configured point to point frame relay subinterface on both interfaces. I > want to use this link on CIR 16k and peak rate 32k. > > My configuration is > > On interface > > frame-ralay traffic shaping > > and on subinterface > > frame-relay class cisco > > and for map-class > > map-class frame-relay cisco > frame-ralay traffic-rate 16000 32000 > frame-relay adaptive-shaping becn > > > and I also tried > > map-class frame-relay cisco > frame-ralay cir 16000 > frame-relay bc 2000 > frame-relay be 2000 > frame-relay adaptive-shaping becn > > > Problem is that when I run data on line e.g. file transfer, bandwidth uses > always 16k or less although no other data run on ckt and total > available bandwidth is 32 k. The data rate does not reach to peak rate and > if I remove traffic shaping then total 32 k used. Is any missing parameter > or command in above configuration? > > regards > > Khurrum > > > -- > _______________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44397&t=44397 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
