Hey, I have a pix to pix vpn that was working fine. I changed the outside ip address on one of the Pix's for a ISP reasons. I then made all the necessary changes on the remote Pix(set peer, and isakmp key.........) I also performed a "clear xlate" on both firewalls. tonight i can vpn to both firewalls, but earlier I couldn't ping addresses on the remote end with a workstation behind one of the firewalls. However, I could ping remote ip address from within the firewall. So the tunnel is up, but why can't the workstations hit those remote addresses? Do I need to clear some crypto or isakmp sa?
Any help would be greatly appreciated. -- Wayne Jang Advanced Computer Technologies, Inc. 108 Main Street Norwalk, CT 06851 Wk 203-847-9433 Cell 203-943-6603 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44931&t=44931 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
