Hello
I have two offices in two diffrent buildings. The are connected
for now using 4 port ATM/IMA interfaces. But 4xE1 is too small
bandwidth for me, so I installed next 4 port ATM/IMA cards. I tryed
multilink-group and multilink interface for create 1 logical interface
from 2 phycials ATM/IMA links, but multilink interface is down :(
Network diagram:
ATM2/ima0 ATM3/ima0
C3640 C3660
ATM3/ima0 ATM4/ima0
C3640 configuration:
interface ATM2/ima0
bandwidth 8000
no ip address
ima clock-mode independent
atm ilmi-enable
atm pvc 1 32 1 aal5snap inarp
multilink-group 1
!
interface ATM3/ima0
bandwidth 8000
no ip address
ima clock-mode independent
atm ilmi-enable
atm pvc 2 32 2 aal5snap inarp
multilink-group 1
!
interface Multilink 1
ip address 10.10.10.1 255.255.255.252
no ip route-cache cef
no ip redirects
no ip proxy-arp
ppp multilink
multilink-group 1
!
on C3660 configuration is indetical, only interfaces number and
ip address
are diffrent.
Interfaces status:
ATM2/ima0 is up/up (protocol,line)
ATM3/ima0 is up/up
Multilunk 1 is down/down
ATM3/ima0 is up/up
ATM4/ima0 is up/up
Multilink 1 is down/down
And idea how to resolv this problem ?
--
TMS
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45239&t=45239
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
