We have a PIX 520 with Software Version 5.1(1) with a 1.44M floppy drive. with 128M of DRAM and 4 ethernet Ports.
Problem: I can Not recover the Enable password: Here is what happens: When I boot it up, It beep twice with long beeps, then another short beep. loads up to the normal prompt PIX520>> but I am locked out and Don't know the Enable password !!! So I tried the CIsco "Pasword Recovery and AAA Configuration Recovery for PIX " Document: and I downloaded the np5.1 file (for this Rev.) and the rawrite.exe (which creates a Pasword Lockout Utility Disk) When I insert the Utility Disk into the PIX floppy (Step 4 in Cisco Doc.) and push the Reset button on on the front of the PIX ... it will reboot from the floppy and displays Booting Floppy .........................exec flop. but the cursor drops to the next line and hangs up there...(no more action but the Flopy LED stays lit ) and it nerver displays "Erasing Flash Password. Please eject diskette and reboot" - that it is puposed to do... So I remove the Diskette and reboot the PIX, But still shows me the old PIX520>> prompt , and I am NOT able to get into the privilege Enable prompt#. Does anyone know how to over come this ????? thanks Sarkis Karagozian [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45402&t=45402 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
