Statics.
"itsme"
Sent by: [EMAIL PROTECTED]
06/06/2002 09:29 AM
Please respond to "itsme"
To: [EMAIL PROTECTED]
cc:
Subject: Re: Design question concerning Pix, DSL, and Frame
T1 [7:45857]
Yes, using statics.
""Wayne Jang"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I think this will work:
> I have a customer that would like to use two connections to the Internet
> (one sdsl and one frame)
> I want the two servers to use the DSL for Internet and the 20 users
could
> use the Frame T1 (no BGP, not load balanced).
>
> I want to use a Cisco 1720 with a serial wic for Frame and a module for
the
> DSL.
> I will than use a Pix 506e behind the router.
> Can I configure the Pix to recognize traffic from the servers and tag it
> somehow so the router will send it out the DSL side of the 1720? The
> traffic from users would need to do the same but exit out the T1. Is
this
> considered routing on the Pix side, or can I use access lists in some
way
to
> make this work? A friend of mine said this could be done, but I'm a
little
> unsure.
>
> Thanks,
> Wayne
>
>
> Wayne Jang
> Advanced Computer Technologies, Inc.
> 108 Main Street
> Norwalk, CT 06851
> Wk 203-847-9433
> Cell 203-943-6603
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=45899&t=45857
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
