What version are you running? With 6.0 and higher you can use the static
command to do port redirection.
static
Maps a local IP address to a global IP address (NAT) and supports TCP and
UDP port redirection (static PAT). (Configuration mode.)
[no] static [(internal_if_name, external_if_name)] {tcp | udp} {global_ip |
interface} global_port local_ip local_port [netmask mask] [max_conns
[em_limit]] [norandomseq]
then create the necessary access-list to go with it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=46039&t=45974
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
