I'm not positive, but I don't believe there is a card that is VOIP support for the Cat5x00 series switch...
I believe the only switches that have such support is the Cat 4006 and the 6x00 series switches... some of the cards are in-line power support, others are Telco line cards and such. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of JohnZ Sent: Friday, June 07, 2002 8:03 PM To: [EMAIL PROTECTED] Subject: Re: VoIP [7:45991] I understand that Cat 5000s don't support VOIP but I think that's only because they don't support inline power on their ethernet blades. Can some one see any other issues with cat 5000 and VOIP combo. ""Mark Odette II"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Cisco UBR900 series Cablemodem, and the Cisco 1750/1760 series Routers > are the low-end VoIP supported routers. The 2600 series routers with > NM-1V/2V cards are low/mid-range VoIP routers for the Enterprise (acting > as Gateways from PSTN or P(A)BXs). Your next step up is the 3600's, > then the Catalyst 4000 Switches, and you continue up the change from > there. > > The 2500's don't support VoIP. > > For the ATA 186, I'm unfortunately without a clue. > > -Mark > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Steve Watson > Sent: Thursday, June 06, 2002 7:19 PM > To: [EMAIL PROTECTED] > Subject: VoIP [7:45991] > > 1 - What routers support VoIP? (Looking for a Cisco Link, can't find > one) > > I have a lot of old 2501's and have been told they don't > support VoIP but have found nothing in writing. > > 2 - Has anyone used the ATA 186? > > > > Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46096&t=45991 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
