Not sure why you would want to disable console in the first place, but... I tried "no password" and that doesn't work... the access-list definitely won't work as console is for out-of-band access. I don't see any way of disabling console. You can tweak bits 11 and 12 of the config register to change the line baud rate from default of 9600. There are only 4 possible settings though... If you're concerned about someone gaining physical access to the router then you have physical security issues...find a dead-bolt and lock it ;)
Charles, CCNP -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 08, 2002 11:26 AM To: [EMAIL PROTECTED] Subject: RE: Disable consolep port. [7:46104] Hi, Well as Jarred said "no password" will disable the password if set on the console. My idea of doing this is set an standard access list to axis the console "Deny any any" command. I think this should not allow any body to axis the console with any IP address,. Hope this will help you Murali Sunil CCNP [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46144&t=46104 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
