I have tried this and gotten nowhere, mostly because I do not get a prompt
at all via console. My term settings r all correct, verified at work
via a 2511, and I tried the ctrl-c during boot as an option to get to a
rommonish prompt. Theres this red light on onside that does not turn off.
Online docs talk about,"Use the monitor's xmodem download procedure to
recover." Monitor's xmodem download procedure? What monitor? What r they
talkin about when they say monitor?
Bri
On Wed, 12 Jun 2002, John Neiberger wrote:
> Yes, these have a boot mode of sorts that allows an xmodem update. Here
> are the instructions for CBOS 2.3.5. I'm sure the instructions are
> similar for other releases:
>
>
http://www.cisco.com/univercd/cc/td/doc/product/dsl_prod/c600s/cbos/cbos230/cbo230rn.htm#xtocid2360917
>
>
> HTH,
> John
>
> >>> "Brian" 6/12/02 3:28:51 PM >>>
> Anyone know if the following is a recoverable error. Someone I know
> has a
> 678, and the power went out while upgrading, it is now nonfunctional.
> They're willing to sell it to me for dirt. Do these have a low level
> they
> boot to if the cbos load fails?
>
> Bri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47180&t=46374
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
