I just did a test on my 3662 running 12.2.6 IP-Only IOS, and it worked like a charm. My only complaint is it doesn't stay in the running configuration, but would be perfect for the startup configuration.
Cisco added this feature in 12.1 apparently? http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121 t/121t5/range.htm Aaron -----Original Message----- From: Roberts, Larry [mailto:[EMAIL PROTECTED]] Sent: 22 June 2002 15:51 To: 'Aaron J. Moreau-Cook'; [EMAIL PROTECTED] Subject: RE: Repeat Commands [7:47185] I think its only for the 6000 series running Native IOS though..... Let us know your results. Thanks Larry -----Original Message----- From: Aaron J. Moreau-Cook [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 22, 2002 8:14 AM To: [EMAIL PROTECTED] Subject: RE: Repeat Commands [7:47185] That was EXACTLY what I was looking for. I have included the group study mail list, for everyone else's benefit. I looked on my 3662 running IOS 12.2(6) and sure enough it's there. I'll have to try it out now. thanks -----Original Message----- From: Glenn Johnson [mailto:[EMAIL PROTECTED]] Sent: 22 June 2002 13:30 To: 'Aaron J. Moreau-Cook' Subject: RE: Repeat Commands [7:47185] That makes sense (being leery of what's on/off) Did you see this? http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/ios121_e/swc g/sw_int.htm#xtocid255273 -----Original Message----- From: Aaron J. Moreau-Cook [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 22, 2002 8:02 AM To: [EMAIL PROTECTED] Subject: RE: Repeat Commands [7:47185] I feel much better making sure it's not running on all interfaces. The example given was a bad one though, how could I apply the command "no ip directed-broadcast" to all interfaces easily? Thanks -----Original Message----- From: Glenn Johnson [mailto:[EMAIL PROTECTED]] Sent: 22 June 2002 12:56 To: 'Aaron J. Moreau-Cook' Subject: RE: Repeat Commands [7:47185] Couldn't you just try "no cdp run" in global config? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Aaron J. Moreau-Cook Sent: Saturday, June 22, 2002 8:11 AM To: [EMAIL PROTECTED] Subject: Repeat Commands [7:47185] Is there a way to simplify configurations where interfaces all share the same attributes? I have a router that has 41 interfaces, but for instance, I want ALL of them to have "no cdp enable" on them. Thanks! interface FastEthernet0/0 ip route-cache cef no ip directed-broadcast no ip redirects no ip unreachables no ip proxy-arp no cdp enable ! interface FastEthernet0/1 ip route-cache cef no ip directed-broadcast no ip redirects no ip unreachables no ip proxy-arp no cdp enable ! interface FastEthernet1/0 ip route-cache cef no ip directed-broadcast no ip redirects no ip unreachables no ip proxy-arp no cdp enable ! interface FastEthernet1/1 ip route-cache cef no ip directed-broadcast no ip redirects no ip unreachables no ip proxy-arp no cdp enable ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47190&t=47185 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
