i have the following config...r5 is the border peer & r8 & r4 are clients...i configure a default cost of 5 on r5 but when i issue a "show dlsw cap" on either client, the peer cost stays @ 3...is this a bug or misconfig?
r5 (the border peer) dlsw local-peer peer-id 100.100.5.5 group 100 border promiscuous dlsw peer-on-demand-defaults cost 5 #also tried configuring "dlsw prom-peer-defaults cost 5" here but it did not work as well - the only thing that works is when i explictly configure the cost on the dlsw local-peer statement (then it shows up on r8 & r4 w/ a cost of 2) ---------------------------------------------------------------------------- ----------- r8 (a border peer client) dlsw local-peer peer-id 100.100.8.8 group 100 dlsw remote-peer 0 tcp 100.100.5.5 ---------------------------------------------------------------------------- ----------- r4 (a border peer client) dlsw local-peer peer-id 100.100.4.4 group 100 dlsw remote-peer 0 tcp 100.100.5.5 Timur Mirza Principal Network Engineer Network Planning & Engineering, West Region 15505-B Sand Canyon Avenue Irvine, California 92618 Verizon Wireless 949.286.6623 (o) 949.697.7964 (c) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47205&t=47205 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
