PBR using "verify-availability" can verify next hop reachability in route-maps. You can also, as mentioned, specify a non connected next hop. This would result in a recursive lookup in the routing table. Also you can specify multiple next hops that the router can try.
Here is a URL and the command needed to do this verification process mentioned above. set ip next-hop verify-availability http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c /ipcprt2/1cdindep.htm Raza ""Chris Charlebois"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The question is how would the router know the host is down without some sort > of heartbeat. > > My next question, and this shows my shallow knowledge of PBR, but can the > next-hop be a non-local address? For instance, can router 1 which is > connected to subnets A and B use a host on subnet C as a next-hop, despite > the fact that router 1 has to go through router 2 to get to subnet C? If it > can, would this create a tunnel, so that traffic would get to the next-hop > address, or would Router 2 receive the packets and try to route them itself? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47640&t=47463 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]