Hi, i was wondering if i may ask you routergods one more question:-). (Oh! and I should say that this question is something I remember from the CCNA exam today. So if anyone of you preffer not to answer in case you see this helping me as me sheeting or likewise im ok with it. Im just stuck and using what I develop the knowledge I need. Just thought id let you know) K, here goes; Say I have the configuration of to routers in front of me. Router_A and Router_B. (Ill use IGRP for this one) Then it could look something like this; Router_A`s config -> Router_A(config)#router igrp 100 Router_A(config-router)#network 192.168.3.0 Router_A(config-router)#network 192.168.4.0 Router_A(config-router)#network 192.168.5.0 Router_B`s config --> Router_B(config)#router igrp 101 Router_B(config-router)#network 192.168.3.0 Router_B(config-router)#network 192.168.6.0 Router_B(config-router)#network 192.168.7.0 What im wondering is. In the Router B routing table here, would I find all networks a(3.0-4.0-5.0-6.0 and 7.0) as they are directly connected networks, or; Only Router_B`s 3.0 6.0 and 7.0 because of the difference in their autonomous system number (100 and 102)?. Best, Morgan mailto:[EMAIL PROTECTED]
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47892&t=47892 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]