You are in ROM MON mode on the switch. You need to run the suggested commands
flash_init load_helper boot once you do a flash_init and load_helper you can use the ? to see what command are available. You will probably need to load an image onto your switch using xmodem before it will boot properly. ""Marian Iordanescu"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi group, > > I have the folowing problem. have Found You the solution for this > problem yet? > > C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE > INTERIM > SOFTWARE > Compiled Mon 30-Apr-01 07:56 by devgoyal > WS-C2950-24 starting... > Base ethernet MAC Address: 00:07:84:f9:09:40 > Unable to initialize flash device at 0xBF000000 -- device not found. > Xmodem file system is available. > Initializing Flash... > ...no flash filesystems found. > > The system has been interrupted, or encountered an error > during initializion of the flash filesystem. The following > commands will initialize the flash filesystem, and finish > loading the operating system software: > > flash_init > load_helper > boot > > switch: dir flash: > unable to stat flash:/: permission denied > switch: flash_init > Initializing Flash... > ...no flash filesystems found. > switch: copy xmodem: flash:c2950-c3h2s-mz.120-5.3.WC.1.bin > Begin the Xmodem or Xmodem-1K transfer now... > CCBB0flash:c2950-c3h2s-mz.120-5.3.WC.1.bin: permission denied > switch: > > > Thank you in advance , > > Marian Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47943&t=47825 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]