Thanks for sending the problem resolution. I really like it when people follow up with the answer! It enhances the learning experience.
Priscilla Dennis Laganiere wrote: > > Thank you all for your helpful suggestions. Below is the > configuration that > did what I wanted: to block all but a select list of MAC > addresses from > accessing my network through a wireless access point. The > configuration > below allows me to add MAC addresses as my users buy NICs. > Keep in mind > this is a temporary solution until I buy a Cisco Aironet 1200, > which people > have told me has some of this functionality built in. > > Thanks... > > --- Dennis > > R2#sh run > Building configuration... > Current configuration : 830 bytes > ! > version 12.1 > hostname R2 > no logging console > enable password cisco > ! > ip subnet-zero > no ip domain-lookup > ! > bridge irb > ! > interface Ethernet0 > no ip address > bridge-group 1 > bridge-group 1 input-address-list 705 > ! > interface Ethernet1 > no ip address > bridge-group 1 > ! > ip classless > ip http server > ! > access-list 705 permit 0000.****.abaa 0000.0000.0000 > access-list 705 permit 0050.****.7a4c 0000.0000.0000 > ! > bridge 1 protocol ieee > alias exec co config t > alias exec i show ip route > ! > > > > -----Original Message----- > From: Dennis Laganiere [mailto:[EMAIL PROTECTED]] > Sent: Monday, July 08, 2002 11:05 AM > To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' > Subject: Mac Layer access list > > I looked through the CCO, the groupstudy archive and my stack > of cisco press > books, but I can't find any information about setting up an ACL > for MAC > addresses. Has anybody done it before? > > Here's what I'm trying to do: I've got a wireless access point > that lets > just anybody join. I want to put a router upstream to block > all but a > limited number of pre-defined MAC addresses. Any thoughts? > _________________________________________________________________ > Commercial lab list: > http://www.groupstudy.com/list/commercial.html > Please discuss commercial lab solutions on this list. > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48449&t=48433 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
