Change to 0x2101 then the flash would be read-write, I don't think enter boot mode would let you erase flash, just give it a try.
Leo Best Regards. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Mark Godfrey Sent: Wednesday, July 10, 2002 4:50 PM To: [EMAIL PROTECTED] Subject: Boot Mode Question [7:48532] Can someone help me to change the configure-register to boot the router into router(boot) mode. I am trying to upgrade the IOS and in comes with a program that will not allow the flash to be deleted so the only way to access the flash and remove it is to boot into boot mode thus disabling the protecting software on the router. Thanks, Mark Godfrey Network Engineer Road Runner High Speed Online Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48542&t=48532 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
