One of your routers should act as DTE end and the other should act as DCE end. To accomplish this you need two cables and as an example you can use one V35-MT (for DTE end) and one V35-FC (for DCE end).
___________________________________________ Fathalla A. Fathalla International Turnkey Systems (ITS) - Riyadh Office P.O. Box 4627 - Riyadh 11412 Phone (: +966 1 4784458 - Ext. 246 Mobile (: +966 55 487 347 Fax (: +966 1 4790482 Email (: [EMAIL PROTECTED] www.itsq8.com Time Zone : GMT + 3 ___________________________________________ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mohammed Saro Sent: Sunday, July 14, 2002 12:33 PM To: [EMAIL PROTECTED] Subject: DB60 back to back [7:48755] I need to know from where I can get cables DB60 back to back to connect two routers directly Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48756&t=48755 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]