What about creating a NSSA and you can create a summary type 7 route, and have the ABR do the type 7 to type 5 conversion which should meet your requirement of not having any type 5's.
-----Original Message----- From: Casey, Paul (6822) [mailto:[EMAIL PROTECTED]] Sent: Monday, July 15, 2002 4:35 AM To: [EMAIL PROTECTED] Subject: Ospf redistruibution query. [7:48817] Hello, Can some help me with this please. (See below) Propagate OSPF loopback addresses on a router into the OSPF process. However OSPF can NOT be run on these interfaces + when propagated, the routes should NOT show up as OSPF external routes. I dont see how this can be done, no matter the routes are redistributed, I would have thought they would have always shown up as External routes, even using the rediustributed connected command. Its just a secenario I am working on. Any help appreciated. Kind regards. Paul. **************************************************************************** ************ This E-mail is from O2. The E-mail and any files transmitted with it are confidential and may also be privileged and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised direct or indirect dissemination, distribution or copying of this message and any attachments is strictly prohibited. If you have received the E-mail in error please notify [EMAIL PROTECTED] or telephone ++ 353 1 6095000. **************************************************************************** ************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48820&t=48817 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
