I have a cisco 2621 gateway voip/isdn, the gateway has fastethernet interfaces to the lan/voip network and a 2vic BRI S/T TE connected to a ISDN BRI.
Calls from a voip terminal to the pstn are OK. Calls from pstn to a voip terminals are KO. It seems I have no chance to digit the post-selection associated to the voip terminal (the same voip architecture with analog line and FXO works fine) I receive ISDN BRI1/0 TX -> DISCONNECT pd = 8 callref = 0xC7 Cause i = 0x809C - Invalid number format (incomplete number) I'm sending the configuration, any suggestion will be appreciate. Teresa isdn switch-type basic-net3 ! interface BRI1/0 no ip address isdn switch-type basic-net3 isdn overlap-receiving T302 5000 isdn not-end-to-end 64 isdn incoming-voice voice isdn send-alerting isdn sending-complete isdn skipsend-idverify Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48896&t=48896 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
