Thanks for the info, My objective would be to get a feel for end to end ATM then migrate to xdsl. My current Environment has several 25xx devices 2 2620's and 2 3620's. When I buy a switch I will need to interface it to these devices.
-----Original Message----- From: Bernard [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 16, 2002 3:21 PM To: [EMAIL PROTECTED] Cc: 'Terry Hines' Subject: RE: Need Cheap ATM Switch [7:48945] Terry, You should buy an ATM switch based on your objectives. If you want to do SVC and PVC auto-discovery, you need a LS-1010 If you want to do PVC, SVC, but no auto-discovery, you can go for LS100. If you want to confine yourself to PVC only with no auto-discovery and no SVC, you might as well go for a back to back cable and no switch at all. Please note that you are NOT required to configure the ATM switch in the CCIE lab. HTH. Bernard > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Terry Hines > Sent: Tuesday, July 16, 2002 12:28 PM > To: [EMAIL PROTECTED] > Subject: Need Cheap ATM Switch [7:48945] > > I am in need of suggestions on which device to purchase for atm in my home > lab. I have read ls 100 is a good choice. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49011&t=48945 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
