Hi, When configuring a back to back serial connection on cisco 2600 router,When configuring the clock rate(DCE ROUTER) I can see the max clock rate speed of 8000000 bits per sec (8 mbps).I have two questions regarding this
1.When I try to configure this I get an error message Invalid input detected at the marker pointing at 8 (in 8000000).But when I try for 4000000 (4 Mbps) it accepts this.Does it really supports 8Mbps ? 2The interface speed supported by serial interface is 1.55 Mbps(Bandwidth) as seen from the show interface command but when I configure the DCE clock rate of 4 mbps .In this case what is the actual speed ? 4mbps or 1.55 mbps ? Kind Regards /Thangavel 186K Reading,Brkshire Direct No -0118 9064259 Mobile No -07796292416 Post code: RG16LH www.186k.co.uk ---------------------------------------------------------------------- The greatest glory in living lies not in never falling, but in rising every time we fall ." -- Nelson Mandela -------------------------------------------------------------------- ********************************************************************** This e-mail is from 186k Ltd and is intended only for the addressee named above. As this e-mail may contain confidential or priveleged information, if you are not the named addressee or the person responsible for delivering the message to the named addressee, please advise the sender by return e-mail. The contents should not be disclosed to any other person nor copies taken. 186k Ltd is a Lattice Group company, registered in England & Wales No. 3751494 Registered Office 130 Jermyn Street London SW1Y 4UR ********************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49046&t=49046 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]